OsteoMed Hand Plating System (HPS®)

For treatment of Radial Head Neck Fracture
Documents
Videos
Features
Documents
Videos
Features
Overview

The OsteoMed Hand Plating System (HPS) features low-profile implants and instrumentation designed specifically for treating hand trauma.

The HPS Plates are available in four size modules: 1.2, 1.6, 2.0, and 2.4 mm, and accept up to four screw types: VA locking, nonlocking, lag, and cannulated. Also featured are hand fusion plates in two different sizes. In total, the system includes 68 plates, 4 screw types, and 3 K-wires.

Explore the OsteoMed Hand Fusion System, with solutions for CMC fusions, PIP fusions, and MCP fusions.

Indications for Use
OsteoMed Hand Plating System is intended for use in trauma, general surgery and reconstructive procedures of the hand, wrist, or other bones appropriate for the size of the device. The OsteoMed Hand Plating System implants are intended for single use only.

Also related to Radial Head Neck Fracture procedure:

Anatomic Radial Head Solutions 2
The Acumed Anatomic Radial Head Solutions 2 system is designed to provide an anatomic implant to replace the patient’s native radial head. Designed in conjunction with Shawn W. O’Driscoll, MD, PhD...
Image

In addition to treating Radial Head Neck Fracture, the OsteoMed HPS Hand Plating System can also be used in the following procedures:

Fracture management (Carpal/Metacarpal) (Carpal / Metacarpal), Fracture management (Phalanges/Thumb) (Phalanges / Thumb)

Fracture Solutions

An at-a-glance application chart.
Modules Distal Phalanges Middle Phalanges Proximal Phalanges Metacarpals and Carpals
1.2 mm    
1.6 mm    
2.0 mm    
2.4 mm      

System Components

1.2 mm Lag Screws capture small, avulsed fragments.

Straight Plates Like T and Y Plates, these may be cut to length and bent to better fit patient anatomy.

Offset Grid Plate Designed to provide fixation of comminuted diaphyseal fractures.

Image

TaperLock™ Screw Retention Technology

The tapered driver tip press fits at .9 mm, and is designed to provide a thinner screw head profile in all OsteoMed Hand Plating System Variable Angle Locking, Nonlocking, and Lag Screws.
Image

Trays

Image
The interchangeable color coded modules - 1.2 mm, 1.6 mm, 2.0 mm, 2.4 mm, cannulated - and instrument tray provide precise instrumentation for every step of the procedure.